SturdyONE Titanium RBA Kit: Build, Wick and Maintain It

Start with the configuration, not the coil

The SturdyONE Titanium RBA Kit arrives set up for one platform, but the box includes the parts to run it in another. Before you wrap a coil, decide whether you are building for a dotAIO device or a boro tank. The conversion is mechanical and uses only the supplied pieces, so it is worth doing first.

For boro use, replace the threaded collar at the base with the Black PEEK Boro Pin Extension, then swap the reverse-threaded dotAIO chimney for the reverse-threaded boro chimney. The kit includes both chimneys and the PEEK extension, along with a 4.2ml dotAIO tank and six airflow pins (3.6mm, 3.0mm, 2.5mm, 2.0mm, and 1mm). Once the correct chimney and pin extension are fitted, the RBA is ready for your build.

What the kit gives you to work with

• Sturdy Mfg Co. SturdyONE Titanium RBA Kit: SturdyONE Titanium RBA Kit, featuring the new ONE UP design, compatible with boro and dotAIO platforms, made out of high grade Titanium. Dual-platform compatibility means one RBA can serve two different setups, but you must fit the correct chimney and pin extension for each.

  

• Sturdy Mfg Co. SturdyONE Titanium RBA Kit: Includes 1 x dotAIO Tank (4.2ml), 1 x dotAIO Chimney, 1 x Boro Chimney, 1 x Black PEEK Boro Pin Extension, and 6 airflow pins (3.6mm, 3.0mm, 2.5mm, 2.0mm, 1mm). These are the parts you will handle during configuration and airflow tuning; knowing them by name prevents mix-ups.

Build and wick: what the supplied information covers

The supplied product record does not include coil type, wrap count, inner diameter, leg length, or wicking material. It also does not specify a recommended resistance or wattage. Those choices depend on your device, your airflow pin, and your own build preferences, so this guide cannot give you a single recipe.

What the record does confirm is that the SturdyONE is designed as an easy-to-use RBA with a reputation for flavor. Use that as your starting point: keep your first build simple, install the largest airflow pin (3.6mm) for the most open draw, and adjust from there. If you are new to rebuilding, follow a general RBA build tutorial for coil installation and wicking technique, then apply it to this deck. The kit does not include wire, cotton, or a coiling tool, so gather those separately.

A safe sequence for your first build

• 1. Confirm the platform: Fit the boro chimney and Black PEEK Boro Pin Extension for boro tanks, or keep the dotAIO chimney and collar for dotAIO devices. The kit includes both.
• 2. Choose an airflow pin: Six pins are supplied: 3.6mm, 3.0mm, 2.5mm, 2.0mm, and 1mm. Start with the largest for an open draw and swap down if you want a tighter pull.
• 3. Install your coil: The record does not specify coil type or resistance. Use a coil suited to your device and check it on an ohm reader before firing.
• 4. Wick and prime: No wicking material is included. Use your preferred cotton, prime it thoroughly, and allow it to saturate before vaping.
• 5. Fill and check for leaks: The dotAIO tank holds 4.2ml. Fill slowly and watch for seepage around the chimney or pin extension, which can indicate a mis-threaded part.

Maintenance that matches the materials

The SturdyONE is made from high-grade titanium, which resists corrosion better than many common RBA materials. That does not make it maintenance-free. The supplied record does not include a cleaning schedule, so use your own judgment and inspect the RBA regularly.

When you re-wick, check the O-rings and threads on the chimney and pin extension for wear or cross-threading. The reverse-threaded chimney is a deliberate design choice, so turn it the correct way to avoid loosening the connection. If you switch between boro and dotAIO configurations often, keep the unused chimney and PEEK extension in the magnetic case so they do not get lost. The record does not confirm whether replacement O-rings or pins are available separately, so treat the included spares with care.

Kit contents at a glance

• Sturdy Mfg Co. SturdyONE Titanium RBA Kit: 1 x SturdyONE Titanium RBA, 1 x dotAIO Chimney, 1 x Boro Chimney, 1 x Black PEEK Boro Pin Extension, 1 x dotAIO Tank (4.2ml), and 6 airflow pins. This is the complete list of what you can rely on having in the box; anything else, such as wire or cotton, you supply yourself.
• Sturdy Mfg Co. SturdyONE Titanium RBA Kit: Available finishes: Cobalt Inferno and Rainbow Splatter. Finish choice is cosmetic and does not affect build or wicking, but it is the only variant decision at checkout.