Kembali ke Blog
Panduan Cara 2026-11-17 vapordna 0 dilihat

YG Creations Asylum Spare Glass Set: Fit and Replacement Guide

YG Creations Asylum Spare Glass Set: Fit and Replacement Guide

Learn what the YG Creations Asylum Spare Glass Set includes, how to confirm it fits your Asylum RTA, and simple care habits that help spare boro tank glass last longer.

Start with the tank, not the glass

The YG Creations Asylum Spare Glass Set is made for the Asylum RTA. Before you order, confirm that your atomizer is the Asylum RTA rather than another boro-compatible tank. The supplied product information identifies this set as replacement glass for the Asylum RTA's short and tall tank sections; it does not list dimensions, glass thickness, or compatibility with other tanks.

That distinction matters because boro tank glass is not universal. If your tank is a different model, this set is not confirmed to fit. If you already own an Asylum RTA, the set gives you one short and one tall replacement glass so you can match the tank section you are actually using.

What the Asylum Spare Glass Set contains

  • YG Creations Asylum Spare Glass Set: The set includes 1 x Short Asylum RTA Replacement Glass and 1 x Tall Asylum RTA Replacement Glass. You get both tank-section sizes in one pack, so a single spare set covers the short and tall configurations of the Asylum RTA.
    YG Creations Asylum Spare Glass Set
    YG Creations Asylum Spare Glass Set
  • YG Creations Asylum Spare Glass Set: YG Creations produces this spare glass set specifically for the Asylum RTA. The intended model is stated, which helps you avoid buying glass for a different boro tank.

A fit check before you install replacement glass

The supplied records do not include installation instructions, torque values, or O-ring sizes. Use the following as a careful handling sequence, not a manufacturer procedure, and stop if anything feels forced.

  1. Match the glass to the tank section: Compare the replacement glass with the section you are replacing. The set contains a short and a tall glass; use the one that corresponds to your Asylum RTA configuration.
  2. Inspect the glass and sealing surfaces: Check the replacement glass for chips or cracks before assembly. Clean the tank's sealing surfaces and confirm the O-rings are seated, since the supplied information does not specify O-ring dimensions or replacement intervals.
  3. Seat the glass without forcing it: If the glass does not sit flush, remove it and recheck alignment rather than pressing harder. The records do not confirm whether slight variation is normal, so a forced fit is a reason to stop and reassess.
  4. Fill and check for leaks before regular use: After assembly, fill the tank and watch the seams. A leak can point to a misaligned glass or a displaced O-ring; the supplied information does not provide a leak-test procedure, so treat this as a basic observation step.

Why a spare glass set is worth keeping on hand

Glass is one of the few tank parts that can fail suddenly, and a cracked section can sideline an otherwise serviceable RTA. Keeping a spare short and tall glass means you are not searching for a matching part after a break. The catalog price of USD 6.50 against a comparison price of USD 12.99 also makes it a low-cost part to store with your build tools.

This is not a universal boro tank glass kit. The supplied evidence does not confirm fit for other tanks, and it does not list glass dimensions. If you need glass for a different atomizer, check that model's own replacement parts instead.

Care habits for boro tank glass

The supplied records do not include cleaning agents, temperature limits, or handling specifications. These habits are general handling advice rather than manufacturer instructions.

  • Keep spare glass in a rigid container: Store the unused short or tall glass where it cannot rattle against tools or batteries. A small hard case with padding reduces accidental contact.
  • Handle glass by the edges: Avoid squeezing the glass walls when removing or seating a section. Pressure on the center of the glass is a common way to crack a thin tank part.
  • Clean without sudden temperature changes: Rinse with lukewarm water rather than moving glass between very hot and very cold water. The supplied information does not confirm a safe temperature range, so avoid extreme swings.
  • Check O-rings when you swap glass: A displaced or worn O-ring can cause leaks that look like a glass problem. Inspect the seals each time you change a tank section.

What the supplied information does not confirm

The product record does not state glass dimensions, material composition, or compatibility with tanks other than the Asylum RTA. It also does not include installation instructions, torque guidance, or a leak-test method. Treat those as unknowns rather than assuming a specification. If your Asylum RTA has a modified tank section or an aftermarket top cap, the fit is not confirmed by the supplied evidence.

For a straightforward replacement on a standard Asylum RTA, the set gives you both tank-section sizes in one pack. Confirm your model first, inspect the glass before assembly, and keep the unused section stored safely for the next break.

Artikel Terkait

Customer Service
Beranda
Produk
Keranjang
Profil