Tilbake til bloggen
Veiledninger 2026-11-21 vapordna 0 visninger

Ambition Mods Revorie RTA Nano Kit: Fit and Build Guide

Ambition Mods Revorie RTA Nano Kit: Fit and Build Guide

Learn what the Revorie RTA Nano Kit includes, what parts you need to complete the build, and how to set up the 2.5mL tank for a sleek, compact RTA.

What the Revorie RTA Nano Kit Includes

The Ambition Mods Revorie RTA Nano Kit is designed to shorten your existing Revorie RTA by replacing the standard chimney and tank section. The kit comes with a compact nano chimney and a 2.5mL quartz glass tank, giving your build a sleeker profile while maintaining the same performance and features.

It is important to note that the kit does not include the build deck or top fill cap. You will need those parts from your original Revorie RTA to complete and use this setup.

Kit Contents at a Glance

  • Ambition Mods Revorie RTA Nano Kit 2.5mL: 1 x Ambition Mods Revorie Nano Chimney The shorter chimney is the key component that reduces the overall height of your RTA.
    Ambition Mods Revorie RTA Nano Kit 2.5mL
    Ambition Mods Revorie RTA Nano Kit 2.5mL
  • Ambition Mods Revorie RTA Nano Kit 2.5mL: 1 x 2.5mL Tank Quartz Glass The quartz glass tank holds 2.5mL of e-liquid and provides a clear view of your juice level.
  • Ambition Mods Revorie RTA Nano Kit 2.5mL: The Revorie RTA Nano Kit does not include the build deck or top fill cap, which are needed to complete and use this kit. You must reuse the build deck and top fill cap from your original Revorie RTA; they are not supplied here.

How to Build and Set Up the Revorie RTA Nano

Before starting, ensure you have your original Revorie RTA build deck and top fill cap on hand. The following steps guide you through converting your RTA to the nano configuration.

  1. Disassemble your standard Revorie RTA: Remove the top fill cap, then unscrew the existing chimney and tank section. Keep the build deck and top fill cap aside; you will reuse them.
  2. Install the nano chimney: Take the Revorie Nano Chimney from the kit and screw it onto the build deck. Hand-tighten until snug; avoid over-tightening.
  3. Attach the 2.5mL quartz glass tank: Slide the quartz glass tank over the nano chimney, seating it on the build deck’s o-ring. Ensure it sits evenly to prevent leaking.
  4. Install your coil and wick: Mount your preferred coil on the build deck, check for hot spots, and wick with your chosen material. The compact chamber may require slightly shorter wick tails; trim to fit without blocking juice ports.
  5. Reattach the top fill cap and fill: Screw the top fill cap back on, then fill the tank through the top fill ports. Close the cap and allow the wick to saturate before vaping.

Wicking and Coil Tips for the Nano Chamber

The reduced chimney height and 2.5mL tank create a more condensed vapor path, which can enhance flavor concentration. For best results, use a coil build that fits comfortably within the deck’s post spacing—common round wire or small fused claptons work well.

When wicking, trim your cotton so it just touches the juice ports without being packed in. Over-stuffing can restrict liquid flow and cause dry hits. The supplied information does not specify exact coil resistance or wattage ranges, so start with your usual build and adjust based on your preferred experience.

Because the kit relies on the original build deck, coil installation and wicking methods remain the same as your standard Revorie RTA. The main difference is the shorter chimney, so pay extra attention to wick length to avoid blocking the airflow or ports.

Available Finish Options

The Revorie RTA Nano Kit is available in three finishes to match your mod or personal style.

  • Black: A sleek, all-black finish that pairs well with dark mods.
  • Gunmetal: A darker metallic tone that offers a subtle contrast on silver or black devices.
  • Stainless Steel: A classic silver finish that matches most standard mods and retains a clean look.

Relaterte artikler

Customer Service
Hjem
Produkter
Handlekurv
Profil