vapordna

A1 Kanthal Wires (5 Feet)

A1 Kanthal Wires (5 Feet) - Main image
$1.75 $3.5 In stock

Category: Accessory

Kanthal A1 has a higher maximum operating temperature of 1400°C compared to 1300°C for Kanthal D. It also has a slightly higher tensile strength. Kanthal A1 has high resistivity, better wet corrosion resistance, and higher hot and creep strength. One of the main advantages of Kanthal A1 over Kanthal D is the fact that it does not easily oxidize. It is excellent for making your own coils.


Specifications:


  • 22% chromium (Cr), 5.8% aluminum (Al), Iron (Fe) balance
  • Density: 7.1 g/cubic cm
  • Tensile strength: 680 n/mm²
  • Melting Temperature: 1500°C (2732°F)
  • Maximum Operating Temperature: 1400°C (2550°F)
  • Density: 0.256 lbs/cubic in.
  • Specific heat capacity @ 68°F: 0.11 Btu/lb°F

Ohms/ft

  • 27 GA - 4.15
  • 28 GA - 5.27
  • 29 GA - 6.55
  • 30 GA - 8.36
  • 32 GA - 13.1
  • 34 GA - 21.1








Before you pay

Check the method and total at checkout.

When it ships

Allow for processing time as well as the journey to you.

Standard Shipping: Handling (business days) 0–1; Transit (business days) 7–15.

Express Shipping: Handling (business days) 0–1; Transit (business days) 7–15.

View policy
If you need a refund

Keep your order number and contact the store to start.

Please contact us for the refund processing timeframe before returning an item.

View policy
Delivery costs

Review the cost for your destination and chosen service.

Standard Shipping · United States: $0.00

Express Shipping · United States: $3.99

View policy
Returning an item

Check the return conditions before sending anything back.

United States · Return window (days after delivery): 30. Return method: By mail. Return postage: Seller pays.

View policy

Customer Reviews (4.6 / 5 · 5 reviews)

Julian W. ★★★★★

Didn't realize how much the higher 1400°C rating would matter until I stopped scorching wire on my hotter builds. Five feet is plenty for several coils, and it holds its shape well when you're wrapping.

James ★★★★★

Wrapped my first coil at 1.4 ohms and it fires evenly with no hot legs. The 1400°C rating gives me plenty of headroom for dry burning, and the wire holds its shape nicely when I tighten the screws.

Richard ★★★★★

Wrapped a coil for my kiln element and this stuff holds up way better at high heat than the last wire I used. The 1400°C rating isn't just a number on paper, it actually keeps its shape without sagging. Five feet was plenty for my build with some to spare.